Showing all 4 results
Cable Fault Locator 10 KV ( PG10 )
In stock
Application
The Cable Fault Locating System PG10 is used to perform DC high pot test, Pre-location of fault distance with the help of pre-locator unit and Pin-point underground cable fault in acoustic method with the help of suitable Surge wave receiver in under-ground HV cables.
Key Features
Operating Mode Surge, ARC(ICM), ARM(MIM) , DC / Proof Test Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method. Perform DC / Proof test up to 10 kV. DC Test Current 10/20mA. Surge Output voltage selectable in three ranges 5,10 kV continuously variable. Full energy delivering capacity at each select range. High Surge energy of 1000 Joules Single Impulse and multiple intervals or as per sequence customer request. Big LCD touchscreen color display.
Cable Fault Locator 32 KV ( PG32 )
In stock
Application
The Cable Fault Locating System PG32 is used to perform DC high pot test, Pre-location of fault distance with the help of pre-locator unit and Pin-point underground cable fault in acoustic method with the help of suitable Surge wave receiver in under-ground HV cables.
Key Features
Operating Mode Surge, ARC(ICM), ARM(MIM) , DC / Proof Test Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method. Perform DC / Proof test up to 32 kV. DC Test Current 10/20mA. Surge Output voltage selectable in three ranges 5,10,15,20,25,30,32 kV continuously variable. Full energy delivering capacity at each select range. High Surge energy of 2000 Joules Single Impulse and multiple intervals or as per sequence customer request. Big LCD touchscreen color display.
Electro-Acoustic Cable Fault Pinpointer
In stock
Application
It is used to pin-point underground cable faults in transmission and distribution power cable network in acoustic mode with the help of suitable surge tester.
Key Features
Perfect functions, suitable for pin- pointing all kinds of cable faults and detect cable path. Synchronous sensing of acoustic and magnetic signals of the fault with high ability to anti-interference. With the assistance of the earphone, direct and easy to identify the fault. Cursor to identify the time delay between the acoustic signal and the magnetic signal, thus to confirm the fault range. Built-in Li-ion rechargeable. Large LCD display with back-light. Charger input voltage 230 V AC 50Hz. Frequency AcousƟc : 70 – 2500Hz, With Filter : 250 – 2500Hz. Accurate Pin-Pointing with step voltage and magnetic field strength. Acoustic channel filtering parameter adjustable.
Time Domain Reflectometer ( TDR )
In stock
Application It is used for pre-location of short circuit, open circuit fault distance in Low Voltage Impulse method and low tester by power transmission, distribution network companies and cable fault location service providers.
Key Features
Multiple working mode. Capable to locate faults in any type of metallic single core armored or multi-core armored cables. Comparison facility of faulty cable with healthy. Maximum measuring range up to 100 km. Big 7″ color LED screen with Touchscreen operaƟon. Battery Operated. 200 MHZ Real-Time Sampling. Waveform Storage and PC Communication. Power Management System for working up to 7 hours.